TUFF CUT SUPPORT CENTRE
The following information answers common general, technical and fitting queries about the Tuff Cut.
If you need further information, or if you have a question that isn't answered here, please email us.
TROUBLESHOOTING |
|
Problem |
Possible Cause |
What size angle grinder can I use with theTuff Cut? |
The Tuff Cut has been designed to suit four and a half & five inch angle grinders |
How do I fit my Tuff Cut to my grinder? |
Mount the Tuff Cut to the grinder in the centre of the metal guard, using the washers provided where appropriate. Ensure that the Tuff Cut will be rotating such that it pulls away from the user when in use. |
Do I need to have the grinder's handle fitted? |
YES! We recommend you use the angle grinders handle for additional control and stability when using the Tuff Cut. |
What is the width of cut? |
The width of the Tuff Cut is cut, is 5mm ( 1/5 of an inch). The Tuff Cuts cutting depth is 25mm (1"inch) depending on the clearance of your grinder. |
Does the Pro-Guard work with the Tuff cut blade? |
No, the pro-guard was specifically designed to suit a four inch grinder. The Tuff Cut is ideally suited to a four and a half inch or five inch grinder. |