TUFF CUT - SUPPORT CENTRE

The following information answers common general, technical and fitting queries about the Tuff Cut. If you need further information, or if you have a question that isn't answered here, please email us.

Fitting Questions/Instructions

Q: Does the Tuff Cut blade not fit my angle grinder?

A: The Tuff cut has been designed to suit four and a half & five inch angle grinders.

Q: How do I fit my Tuff cut to my grinder?

A: Mount the Tuff Cut to the grinder in the centre of the metal
guard, using the washers provided where appropriate. Ensure that
the Tuff Cut will be rotating such that it pulls away
from the user when in use.

Q: Do I need to have the grinder's handle fitted?

A: YES! If your angle grinder is an older model and only has one
handle port, now is the time to invest in a new one.

Q: What is the width of cut?

A: The width of the Tuff Cut is cut, is 5mm( 1/5 of an inch). The
Tuff Cuts cutting depth is 25mm (1"inch) depending on the
clearance of your grinder.

Q: Does the Pro-Guard work with the Tuff cut blade?

A: No, the pro-guard was specifically designed to suit a four inch
grinder.